Naval jelly rust remover8/7/2023 For treatment with Naval Jelly, the pink gel is brushed on the metal surface, allowed to stay for 5-20 minutes, then rinsed off. The iron phosphate provides a thin protective coating to minimize further oxidation. The phosphoric acid dissolves the Rust (iron oxide) and then reacts to form iron phosphate. Naval Jelly contains Water (65-70%), Phosphoric acid (25-30%) and Sulfuric acid (1-3%) in a gel matrix composed of a thixotropic polysaccharide (1-3%), isopropanol (1-3%), Surfactant (1-3%) and Silica (0.1-1%). Obtain medical attention.A registered trademark for a commercial rust remover. If symptoms persist, obtain medical attention.Įye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Skin contact: Immediately flush skin with plenty of water (using soap, if available). If discomfort persists seek medical attention. 65 WarningThis product contains chemicals known to the State of California to cause cancer.įirst AidInhalation: Remove to fresh air. Wash thoroughly after handling.ĭisposal informationDispose of according to Federal, State and local governmental regulations.Ĭalifornia Prop. Handling informationAvoid contact with eyes, skin and clothing. May injure eye tissue if not removed promptly.Įxisting conditions aggravated by exposure: Respiratory disorders.Ĭarcinogenicit圜omponents of this product are listed as carcinogens by IARC, NTP and OSHA. ![]() ![]() Prolonged inhalation of large concentrations can be irritating to lungs, and mucous membranes of nose and throat.Įye contact: Contact with eyes will cause irritation. Inhalation: May cause respiratory tract irritation. Relevant routes of exposure: Eye contact, Skin contact, Inhalation, Ingestion Wash thoroughly after handling.Įmergency Overview: May cause eye, skin and respiratory tract irritation. WarningsAvoid contact with eyes, skin and clothing. Volatile Organic Compounds g/L With Solvent : 28.6 HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.HMIS RATING Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.ĭate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.MSDS Verified : Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Material Safety Data Sheet (MSDS). Identified, on a case-by-case basis, from scientific evidence as causing probable serious effects to human health or the environment of an equivalent level of concern as those above (e.g. Persistent, Bioaccumulative and Toxic (PBT) or very Persistent and very Bioaccumulative (vPvB) according to the criteria in Annex XIII of the REACH Regulation, orģ. Carcinogenic, Mutagenic or toxic to Reproduction (CMR), meeting the criteria for classification in category 1 or 2 in accordance with Directive 67/548/EEC or in category 1a or 1b in accordance with EC No 1272/2008This directive was recently replaced by the new EU regulation (EC) No 1272/2008.Ģ. ![]() SVHC are defined in Article 57 of Regulation (EC) No 1907/2006 (“the REACH Regulation”) and include substances which are:ġ. SVHC is a substance (identified by the European Chemicals Agency) that may have serious and often irreversible effects on human health and the environment.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |